| CPC A61M 16/161 (2014.02) [A61M 16/0003 (2014.02); A61M 16/0006 (2014.02); A61M 16/0066 (2013.01); A61M 16/0069 (2014.02); A61M 16/009 (2013.01); A61M 16/024 (2017.08); A61M 16/0666 (2013.01); A61M 16/0875 (2013.01); A61M 16/1075 (2013.01); A61M 16/109 (2014.02); A61M 16/1095 (2014.02); A61M 16/16 (2013.01); A61M 2016/003 (2013.01); A61M 16/0683 (2013.01); A61M 2205/3303 (2013.01); A61M 2205/3368 (2013.01); A61M 2205/36 (2013.01); A61M 2205/50 (2013.01); A61M 2230/40 (2013.01)] | 6 Claims |

|
1. A high flow therapy apparatus with a drying mode, the apparatus comprising:
a housing;
a blower within the housing and configured to provide a gases flow of 15 to 40 L/min during a high flow therapy;
a humidifier comprising a chamber and heater plate, the chamber configured for rapid removal directly from the exterior of the housing;
a tube comprising a heater wire and configured to removably couple to an outlet to facilitate gases flow, the heater wire embedded in a wall of the tube;
a controller configured to allow the blower to provide the gases flow of 15 to 40 L/min during the high flow therapy, detect an end of the high flow therapy, and automatically start the drying mode;
the drying mode comprising reducing a heat output by the heater plate, using the blower to provide a gases flow at a constant rate, and using the heater wire to heat gases within the tube;
the controller further configured to operate the drying mode for a predetermined time.
|