| CPC H01M 4/525 (2013.01) [H01M 4/043 (2013.01); H01M 4/0471 (2013.01); H01M 4/505 (2013.01); H01M 10/0525 (2013.01); H01M 2004/021 (2013.01); H01M 2004/028 (2013.01)] | 18 Claims |

|
1. A lithium metal composite oxide having a layered structure, comprising at least lithium, nickel, and an element X, wherein:
the lithium metal composite oxide is represented by composition formula (A):
Li[Lim(Ni(1-n)Xn)1-m]O2 (A),
wherein m and n satisfy −0.1≤m≤0.2, 0<n≤0.6 and 0<m+n<0.6,
the element X is at least one element selected from the group consisting of Co, Mn, Fe, Cu, Ti, Mg, Al, W, Mo, Nb, Zn, Sn, Zr, Ga, V, B, Si, S and P,
the lithium metal composite oxide contains single particles and satisfies all of requirements (1) to (5):
(1): a volume-based 50% cumulative particle size D50 of the lithium metal composite oxide is 2 μm or more and 10 μm or less;
(2): the single particles have, on at least a part of surfaces thereof, adhered fine particles, with the proviso that a maximum particle size of the adhered fine particles is smaller than a particle size of the single particles;
(3): the particle size of the single particles is 0.2 to 1.5 times the D50 of the lithium metal composite oxide;
(4): a particle size of the adhered fine particles is 0.01 to 0.1 times the D50 of the lithium metal composite oxide; and
(5): an average number of the adhered fine particles adhered per particle of the single particles is 1 or more and 30 or less as measured with respect to a range observable in an image obtained by scanning electron microscope.
|