| CPC G16H 20/17 (2018.01) [G06K 7/1413 (2013.01)] | 18 Claims |
|
1. An infusion system comprising:
an infusion device;
a network data transceiver; and
a processor configured to:
determine, at the infusion device, whether the infusion device is in a prepared state to receive an automated programming request;
in response to determining that, and while, the infusion device is in the prepared state:
present, on a display of the infusion device, a unique identifier of the infusion device;
wait for an indication that the unique identifier of the infusion device was scanned by a scanner to associate the infusion device with an infusion order;
receive from a data network system, at the infusion device, in response to receiving the indication, configuration information associated with the infusion order; and
automatically configure the infusion device to cause infusion of a medical fluid specified in the infusion order to a patient based on parameters of the infusion order provided by the received configuration information; and
in response to determining that the infusion device is not in the prepared state:
not presenting the unique identifier from the display of the infusion device;
identifying an error associated with the infusion device not being ready to receive the automated programming request;
automatically adjusting the infusion device to correct the error based on one or more connection type, configuration type, or usage type parameters associated with the infusion device;
adjusting a network parameter of the infusion device, the network parameter comprises a transport protocol or a credential; and
causing the infusion device to administer the medical fluid specified in the infusion order to the patient after the infusion device has been adjusted to correct the error.
|