| CPC G01N 33/582 (2013.01) [G01N 1/42 (2013.01); G01N 21/6458 (2013.01); G01N 2021/6439 (2013.01)] | 1 Claim |
|
1. A method for analyzing the content and distribution of microplastics in Medusozoans, comprising the steps of:
(1) an exposure experiment of Medusozoans: adding polystyrene microspheres (PS-MPs) with a diameter of 1 μm labeled by a 4-chloro-7-nitro-1,2,3-benzoxadiazole (NBD-CL) fluorescent dye with an excitation wavelength of 488 nm and an emission wavelength of 518 mm, as test substances, into artificial seawater to prepare an exposure solution;
taking healthy juvenile jellyfish with umbrella diameters of 2.5±0.5 cm as test animals, followed by randomly dividing into an exposure group and a control group,
in the exposure group, 3 PS-MPs having concentration levels of 0.1 mg L−1, 1 mg L−1 and 10 mg L−1 with an exposure period of 5 d, and
other experimental conditions comprising a temperature of 22±1° C., a salinity of 25±1% ‰, a light cycle of alternating 12 h of light and 12 h of darkness, and feeding with brine shrimp nauplii every day; and
placing living Medusozoans in the exposure group into a container containing the exposure solution; and placing living Medusozoans in the control group into the artificial seawater for cultivation for a period of time, fishing Medusozoans out of a glass bottle with a stainless medicine spoon, washing microplastics on surfaces of Medusozoans with clean seawater, followed by transferring to the clean seawater, and repeating the above steps for three times;
(2) observation with a stereotype fluorescence microscope: positioning the distribution of microplastics in the whole living Medusozoans using a stereotype fluorescence microscope after the exposure of Medusozoans to fluorescent microplastics at an exposure concentration of 10 mg L−1 for 5 d, a GFP-B typed light filter being used in the stereotype fluorescence microscope;
(3) plotting of a standard curve of fluorescence microplastics: preparing gradient fluorescence microplastics solutions with different contents of microplastics, taking 1 mL of a standard solution and dropping the same into a culture dish, placing the culture dish into a detection chamber of a small animal living imager, determining fluorescence intensities of each of solutions after specific excitation and emission wavelengths are set, and plotting a standard curve of a fluorescence intensity varying with content of microplastics, wherein the standard curve of fluorescence microplastics is set with the contents of microplastics of 0 μg, 5 μg, 20 μg, 50 μg, 100 μg and 200 μg;
(4) sample fluorescence imaging and calculation of content of microplastics: transferring the living Medusozoans to the culture dish, determining fluorescence intensities in Medusozoa tissues using the small animal living imager at the excitation and emission wavelengths of step (3), and calculating corresponding content according to the standard curve, a background value of the blank control group being deducted from results of samples in the exposure group to obtain a final result; and
(5) freeze-drying of samples and calculation of a microplastics concentration: placing the tested samples into a freeze-drier to dry for 48 h, followed by weighing to obtain a dry weight of the Medusozoa tissues, and converting the content of microplastics in step (4) into the content of fluorescent microplastics in unit mass of the tissue.
|