| CPC H02M 1/32 (2013.01) [H02M 7/44 (2013.01)] | 3 Claims |
|
1. A power conversion device, comprising:
a major circuit part including
a power conversion part converting, into alternating current power, power that is input, and
a filter circuit causing the alternating current power output from the power conversion part to approach a sine wave;
a control device controlling power conversion by the major circuit part by controlling an operation of the power conversion part;
a first measurement device measuring a line current of each phase and a phase voltage of each phase of the alternating current power output from the power conversion part; and
a second measurement device measuring a line current of each phase and a phase voltage of each phase of alternating current power output from the major circuit part, active power at an output end of the major circuit part, and reactive power at the output end of the major circuit part,
the control device including
a command value calculation part receiving input of an active power command value and a reactive power command value and receiving input of measured values of the active power and the reactive power of the output end of the major circuit part, the command value calculation part calculating a phase voltage phase command value of the alternating current power output from the major circuit part based on the active power command value and the measured value of the active power, the command value calculation part calculating a phase voltage amplitude command value of the alternating current power output from the major circuit part based on the reactive power command value and the measured value of the reactive power, and
an overcurrent suppression controller calculating instantaneous value voltage output command values of the phases of the alternating current power output from the power conversion part to suppress an overcurrent at the output end of the major circuit part by using all input information of the phase voltage phase command value, the phase voltage amplitude command value, the measured values of the phase voltages and the line currents of the alternating current power of the power conversion part, and the measured values of the phase voltages and the line currents of the alternating current power of the major circuit part,
the control device controlling the operation of the power conversion part so that voltages corresponding to the calculated instantaneous value voltage output command values are output from the power conversion part.
|