CPC A61K 31/05 (2013.01) [A61K 9/0014 (2013.01); A61K 9/06 (2013.01); A61K 31/12 (2013.01); A61K 36/73 (2013.01); A61K 47/44 (2013.01); A61K 47/46 (2013.01); A61K 2236/15 (2013.01); A61K 2236/17 (2013.01); A61K 2236/333 (2013.01); A61K 2236/51 (2013.01); A61K 2236/53 (2013.01)] | 5 Claims |
1. A method of making a broad spectrum cannabidiol oil ointment comprising the steps of: a) harvesting cannabis; b) drying said harvested cannabis until the moisture content is approximately 5%; c) milling said dried cannabis into small pieces of a uniform size to form milled dried cannabis; d) visually inspecting and removing very large stems and any foreign material from said milled dried cannabis; e) cryogenically freezing said milled dried cannabis to −19° C. to form a cryogenically frozen milled dried cannabis; f) adding in pure ethanol and creating a ratio of 1:1 by weight of said ethanol to said cryogenically frozen milled dried cannabis and agitating it in a chilled jacketed kettle forming a hemp biomass; g) straining and centrifuging said hemp biomass; h) placing said strained and centrifuged hemp biomass from step g) into a suitable container and placing it under a high vacuum at 19° C. to form a dried material; i) winterizing said dried material by chilling to −40° C. and holding it at that temperature for 24 hours −36 hours which will form a winterized dried material; j) taking said winterized dried material and applying a vacuum through a buchner apparatus consisting essentially of a buchner funnel, a qualitative filter paper and a buchner flask, and then collecting the filtrate in the buchner flask; k) taking said filtrate and placing it in an oil bath at 121° C. to strip cannabidiol acid from the filtrate to form a decarboxylation biomass; l) taking said decarboxylation biomass and applying a high vacuum separating said decarboxylation biomass into plant material and golden colored cannabidiol oil distillate; m) taking said golden colored cannabidiol oil distillate, and placing it in a suitable container; n) taking said golden colored cannabidiol oil distillate, and adding in 0.556% by weight of the final mixture of said golden colored cannabidiol oil and placing it in a suitable glass beaker; o) adding in 27% by weight of the final mixture of the secondary active ingredients to said beaker; p) adding in 69.44% by weight carrier to said beaker; q) mixing and heating the contents of said beaker to a minimum of 66° C., not to exceed 82° C.; r) cooling the mixture to room temperature to form an ointment; and s) taking said ointment and placing it in a suitable container such as a jar or a tube.
|