CPC G02B 27/0172 (2013.01) [B29D 11/0048 (2013.01); B29D 11/00317 (2013.01); B29D 11/00413 (2013.01); B29D 11/00432 (2013.01); B29D 11/00461 (2013.01); B29D 11/00548 (2013.01); B29D 11/00865 (2013.01); G02B 27/0101 (2013.01); G02B 27/0103 (2013.01); G03H 1/0248 (2013.01); G03H 1/0256 (2013.01); G03H 1/0402 (2013.01); B29D 11/00442 (2013.01); B29K 2995/0018 (2013.01); G02B 2027/0107 (2013.01); G02B 2027/0109 (2013.01); G02B 2027/0178 (2013.01); G02C 7/086 (2013.01); G02C 11/10 (2013.01); G03H 2001/043 (2013.01); G03H 2001/0434 (2013.01); G03H 2001/0439 (2013.01); G03H 2250/37 (2013.01); G03H 2260/12 (2013.01); G03H 2270/55 (2013.01)] | 19 Claims |
1. A method of manufacturing a lens for use in a wearable heads-up display, the method comprising:
providing a photopolymer film;
providing a light directing element in contact with the photopolymer film while the photopolymer film is planar, the light directing element compensating for an optical effect of at least a curvature subsequently applied to the photopolymer film;
integrating the photopolymer film into the lens by at least one of:
molding the photopolymer film into the lens; or
adhering a surface of a first portion of the lens and a surface of a second portion of the lens to the photopolymer film.
|